The Camber Corporation
The Camber group
GCL Incorporated
Home
Contact Us
Camber Corporation
Construction Products
Mine & Tunnel
Monorail & Bridge Crane
Industrial Supplies & Coatings
Sprayon
Krylon
Trash Cans
Gallery
GCL Incorporated
Fabricating Capabilities
Stamping
Contract Manufacturing
Squee-zit Oilers
Gallery

Industrial Supplies & Coatings

Sprayon Zinc-Rich Cold Galvanizing Compound

Sprayon S00740 high-solids compound works like no other anticorrosion spray for metal. It has been formulated specifically for steel and wrought iron equipment exposed to corrosive environments. Simply spray S00740 as you would any aerosol coating. The epoxy-based compound fuses zinc to the surface of the metal, stopping rust by electrochemical action.

The zinc in S00740 preserves the strength of the base metal, protecting the surface and extending the life of the equipment. And unlike conventional primers, Sprayon S00740 prevents rust creepage on scratched areas. The result is a coating that provides maximum protection against rust – protection that is equal to or better than hot-dipped galvanizing.

In a side-by-side comparison, our side wins.
Both of these metal samples were subjected to 1,575 hours of salt spray after treatment with zinc-rich coatings. The Sprayon S00740 sample on the left shows no sign of corrosion, while the Crown 7007 sample shows signs of rust creepage.

Sprayon S00740's unique formulation makes it the best coating you can buy for metal exposed to the elements. It protects your equipment from the adverse effects of extreme heat and cold, salt,dirt, precipitation and more. Plus, it goes on easy, without clogging or running, and dries fast.

sprayon galvanizing compound

cold galvanizing compund zinc-rich primer
Sprayon S00740 Zinc-Rich
Cold Galvanizing Compound
Crown 7007
Zinc-Rich Primer

 

sprayon zinc rich cold galvanizing compound

For all kinds of equipment, all kinds of conditions.
Sprayon S00740 has been developed for use on surfaces subject to the most severe corrosion conditions, including metal fences, gutters, bridges, automobiles, structural steel, damaged galvanized surfaces, marine equipment, farm equipment and wrought iron. It is also ideal for use as a maintenance spray for highway work, power plants, refineries and more.

  • STOPS RUST
    Highly resistant to salt corrosion and water; resists rust creep.
  • DRIES FAST
    Dries to the touch in less than 15 minutes; can be recoated within hours.
  • COVERS IN ONE COAT
    May be topcoated with conventional metal primers/finish coats.
  • WON'T SAG
    Excellent anti-sag and anti-setting properties
  • HIGH-DELIVERY VALVE
    Provides uniform spray with no clogging.
  • MEETS MIL SPECS
    Meets or exceeds performance requirements for MIL-P-26915C.
 
 
 
 
 
 
Camber Corporation • 2559 Brandt School Rd. • Heritage Center, Suite 200 • Wexford, PA 15090
724-933-6040